Vision Electronics

APD CCR's from GBP 3,969.00

At the heart of the new generation APD rebreathers lays the Vision electronics package.

By combining the reliable, performance benchmark, oxygen control of the Inspiration Classic with the latest manufacturing methods used in high volume dive computers and extending their features, the Vision electronics bring even easier diving, simple yet innovative and advanced warning systems and simple upgradeability to allow not just safe software updates but also Hardware developments as they occur - future proofing your investment.






Crystal Clear Vision

Without doubt one of the great advantages of the Vision package is the clarity of its communication of information to the diver in terms of content, readability and understanding. The wrist mounted Primary Display LCD Screen is crystal-clear (adjustable contrast) with easy-read numbers, graphics and written text to make the message unequivocal.

“The handset is very robustly built and readily viewable because it's handily strapped to your left wrist. I didn't have to grope around to find it… It initially fires up much like an Inspiration, with all the usual questions, and confirmations by button-pushing. It's quick, slick and comprehensive, with pre-dive self-checks.” - John Bantin - Visionary Evolution - Diver Test Special

In normal use the information displayed includes: the oxygen controller, C1 or C2 - controlling the ppO2, the Setpoint, the Scrubber status (if the Scrubber Monitor option is chosen), the Battery status of both batteries and which one is providing the power for the solenoid and wrist display, the ppO2from all three oxygen cells in real time as measured by the Master controller (or the Slave’s ppO2 displays at the touch-of-a-button request)

On the surface the date and time are shown with atmospheric pressure. Underwater the dive time and depth are shown along with maximum depth.

See the manual for the full list, but typical text warnings (given in capital letters) include things like: “START ERROR!” (if the pre-dive sequence is not completed properly), “HIGH OXYGEN”, “LOW OXYGEN”, “SCRUBBER WARNING”, “CELL WARNING”, “LOW BATTERY”, “SLOW” (ascent speed warning) and so on. These are all reinforced by other indications such as the scrubber bar graphic, battery graphics, the cell reading figures (etc), the buzzer and the HUD.

If either the Nitrox or Trimix decompression options are purchased the display also shows No Stop Time, which reverts to Total Time to Surface (TTS) and ceiling depth once the diver requires decompression stops



For an at-a-glance list and full details of the many innovations and options offered with the Vision electronics: