$635.27

Quantity:

The Liquivision X-Link is the live PO2 monitoring connection for use with the X1. RRP USD $ 499.00 Contact us for information regarding the type of X-Link you need for your CCR.

The X-Link’s construction is the same as the X1 consisting of an aluminum case, lithium polymer battery, and fully potted internal electronics for durability and flood-proofing. The X-Link comes in two versions, Fischer Connector and Hardwired. Both can be connected to a rebreather and monitor up to 3 oxygen cells. Additionally, the X-Link is set up to monitor a fourth channel should the diver choose. Information from the X-Link is transmitted to the X1 optically to ensure no failure points are introduced with the use of the live PO2 monitor.

Liquivision X-link Specs

Features

* Monitors all 3 primary O2 cells
* Monitors independent 4th O2 cell
* Monitors one CO2 or Helium channel (CO2 or Helium sensor not included)
* Open Platform Development Kit

Hardware Specifications

* Small size (4.3 x 3.2 x 2.5 cm; 13/4 x 11/4 x 1 inches)
* Rechargeable Battery
* User reprogrammable CPU
* Hard anodized casing
* Potted electronics
* Communicates optically with X1
* Highly stable signal digitization
* Optically isolated & fully independent from X1 computer

Liquivision X-Link Versions:

Fischer and Hardwired
Fischer X-Link

The Fischer X-Link is equipped with a 7-pin female Fischer socket into which you can plug your Fischer cable.

WARNING: Fischer cable not included.

You will need to purchase your Fischer cable separately. Fischer cables are available at:

* Narked At 90: www.narkedat90.com
* Dive Gear Express: (formerly Dive Rite Express) www.divegearexpress.com

Hardwired X-Link

The Hardwired X-Link is equipped with approximately 5 feet/1.5 metres of water-stop cable that must be hardwired into the rebreather head (contact your rebreather manufacturer for assistance with this process).